Suppose your half-sewn sweater has shoulder seams. You want to sew your shoulder seams properly. But you do not know how to sew it properly. Today we have this article about shoulder seams for this group of people. Basically, there are several rules for sewing shoulder seams. In that case, if you are new, you should master the rules that are relatively easy and can be completed in less time. Today we will discuss in detail such rules.
The easiest rules for sewing shoulder seams:
- Although you are new to these rules, you can easily fix the work of the shoulder seams joint. I think this technique is most effective even if you are in a hurry to work. Let’s not go into details.
- Usually, shoulder seams have a total of two parts. One back and one front. However, if you sew the neck on both sides in the same way. Or in the same design, then you do not have to recognize those two parts. In this case, you have to take any part.
- With two parts, first, decide which stitch you made the sweater or dress. Today’s article is for the basic braided type of stitching.
- Insert the yarn of your choice in the needle of sewing woolen cloth. Then pull one side of the yarn When it is half, that is, when both sides are equal, stop.
- Tie a knot on either side of the yarn. Which will strengthen your Shoulder Seam joint. Otherwise, whenever you insert the needle into the fabric for sewing. It will come out immediately after pulling.
- After setting the thread on the needle, take two pieces of Shoulder Seams. Place the two side by side and face the two sides that you will sew. It will be convenient to sew.
- Now insert the needle inserted into the back of the shoulder seams, i.e., the back of your sweater. Take the hand on the other side and pull it up.
- After pulling, go back to the side from which you started inserting the needle. You will see that there is a part of the yarn out there. Pull it up to see if it is stuck to the cloth for the first given git.
- If so, good. If it does come out, untie, or cut the previous knot. Give a new knot so that the yarn cannot come out completely through the empty part of the cloth.
- Now go to the upper side and pull the yarn Insert the needle on the other side i.e., the front side When you pull it lightly, you will see that the two parts of the Shoulder Seams are done together.
- In the end, pull a little pair of yarn and make a small knot in the upper corner of the side of the shoulder seams. So that it does not open. So, it became your Shoulder Seams sewing job. Do the other one in this way.
Frequently Asked Questions / FAQ’s
- Is the rule of sewing two shoulder seams the same?
Answer: Yes. The rules for sewing two shoulder seams are the same and with this rule, you can work on the joints of sweaters or other dresses made with all your wool and made of normal yarn.
- In addition to these rules, there are more rules for sewing shoulder seams.
Answer: Of course, there is. However, it is quite easy and smooth to do. As a result, you will be able to do it quickly even if you are new.
- How do you measure shoulder seams?
Answer: Measure beyond double the measurement. Cover width is measured from the point where the armhole matches the shoulder seam to the end of the fold. Shoulder width is included from the shoulder point to shoulder point, right across the back.
- Which yarn would be better?
Answer: Selecting the type of yarn you will be sewing is the most important. Wool is also known as the queen of yarns. This is the top choice of knitters for this scheme. Retrieved from sheep and several other animals, it is one of the most enduring fibre types. So, you can use it.
- Where should Seams be on the shoulder?
Answer: Your shoulder seam should ideally bound up with your original joint bone. When your arms joints fit where the seam functions, it looks right, feels right and the covers serve to fit better, too.
Final Words
Hopefully, in the above article, I have been able to highlight the details. You can try it at home today. Of course, do not despair. It is strong enough and permanent sewing. However, if you want, you can do the work on a knitting machine.
